Handlebar Upper Cover Replacement S-XC-S00244

Removal Procedure

1. Loosen the upper handlebar cover screws (1) enough to separate the upper from the lower cover.

2. Turn the handlebars enough to remove the lower handlebar cover screws (2)


Image 51


3. Remove the handlebar bottom cover screws (1).

4. Separate the upper cover from the lower cover and remove from the scooter.

Image 52



Installation Procedure

1. Align and snap together the upper and lower handlebar covers.
2. Turn the handlebars and install the lower screws (2).

3. Tighten the upper handlebar cover screws (1).

Image 53


4. Install the handlebar bottom cover screws (1).

This article was helpful for 1 person. Is this article helpful for you?