Charger - Data Signal Harness replacement - SX-000209


  1. Remove both side front fairings - refer to S-XC-S10900
  2. Remove NiMH battery - refer to NiMH S-ST-100000
  3. Remove battery charger - refer to S-XC-S00540
  4. Cut zip-ties holding Charger Data harness and connector (1)

  5. Disconnect VEC5000 connector

  6. Remove VEC5000 harness by pulling it out as shown in the picture below

This article was helpful for 1 person. Is this article helpful for you?