Hello, I don't know if mail adresses still work but let's try to contact former staff about the inventory.

Staff members have names. I'll try to reach them another way. 

if Vectrix got in liquidation process, liquidator's job is to retrieve as much momey as they can. So selling the inventory maybe a good thing for him.KMLK

hello, 

I've been said last week that Vectrix was offcially over two years ago. 

I chatted with Vectrix people in july about BMS problem. 

No more answer yet in september.

it sounds like a game over.

so sad.

this site may disapear too I guess.

I copied it on my hard disk to keep knowledge about VX 1 available.

sylvain_lecoeur@hotmail.com.

Thank you very very very much.

I was wondering how to save THIS site before it closes....

something like a page vaccum cleaner. to recreate another site.

sylvain_lecoeur@hotmail.com

Hello Azzuro,

Back with my problem. I checked all I could (even inside theBMS wich had a internal plug slightly moving). swapped the two DB25 plugs. The problem swapped too on the screen (slightly different). That mean it could be from the battery pack.  

Balance can't be achieved. (hi 4.15; low 4.08) after 10 hours in EO mode. never stops.

now; gauge never goes higher than 13 bars. I will recheck manually cell by cell to compare BMS and multimeter. and see if one cell still looses 1volt in 30 seconds as charged with multimetrer.. but not with BMS plugged.

Shop for parts has disappeared. Do you know anything about?

Thank you.

Hello Piotr,

We talked in July about a battery problem. I would like to buy a new BMS. But store disappeared.

I hope it's not game over.   I hope you (as a person) are ok.

sylvain_lecoeur@hotmail.com

hello, I had a problem in july, with my BMS, and I asked questions to Anna. She anwered. I mean there was some human beings still running Vectrix in july. I've just sent a mail. Let's wait....I'll also try to contact resellers to get a BMS...

Hello Randy,

I had answers in july 2021.

from:    annafalkowska@vectrixeurope.eu

regards.

Hello, I have  the same quastion but in 2021.

Thank you very much Azzuro.

the next question is:

Fisrt step: opening VX to check cables

2) recheck cells with canbus

3) check the cell with a multimeter

4) if really above 4.2, slightly and slowly dichage the cell with the right resistance value (U=R*I) let's say 100mA  R= 4/0.1=40 ohms 0.5 watts.

5) restart charger when cell is around 4.08

Am I right?

If it restarts, I'll try if a cell goes down again under 2.92 riding. As it did as first symptom. Before charging worked 1 time only after several tries .

Thank you.

P.S.   VX is given for 180km and Itried successfully 140 when I bought it (used, 1000 KM)