hello .my acceleration handlebaar stopped working today whilst driving , dashboard ok , no erors, i hear a whine from the motor when trying to turn handlebar.after turning ignition off and waiting a few minutes works again. I opened the encoder cover , seem like the grease from the motor bearing entered in the encoder enclosure . What is the procedure replacing  the seal bearing? Do i need to buy the calbration tool?

it came in the same box with the charger, unfortunately it was so nicely wrapped i haven't seen it initially.

when one orders a PFC 3,3 kW charger this is what he should receive

i received the following installation instructions from mr. Matteo Zordan:

Exellent so cut out the cable going down from charger to bms, in your picture there is a label 002240, you can cat on the label, than you need to connect bms power supply 12volt in parallel with bms fan 12volt and canbus signals to J22 MC connector (use pin 2 and 3 of J22 for 12volt – and pin 10 – 11 of J22 for canbus) enclosed wiring diagram to identify pinout.

Than u need to connect charger 4 pin connector to black box, next to it there is a 6pin slot where u need to connect the short harness that goes to main harness J3 connector (leave empty the 6pin slot on the opposite side of the black box)

Charger AC cord is pug and play

Charger dc output goes with 2 ring directly screwed to battery terminal (old charger DC cable need to be removed but u need to leave the connection between mc anf mc cooling fan white and brown cable)

would buying this solve my problem http://dugasengineering-com.3dcartstores.com/Universal-Charger-Interface-UCI_p_38.html?

or i need to change my bms also?

Hi , thanks for  your reply !

This is really disappointing  that   i I bought a very expensive charger from vectrix online shop and waited 3 weeks for it to arrive only to find out it is not plug and play .

i wonder why it comes with adaptor plate if it doesn't have the adaptor components . 

there should be more information on the subject , or a warning that it is not fully compatible without extra parts,   or a complete plug and play kit for sale.

unfortunately I've spent already enough money on this project and i lack in depth knowledge of electronics  so i see myself forced to return the charger and buy the cheaper version.

hope this help other people avoid the mistake i made .

Kind regards, 

Dan