Your comments
Just to be sure. You probably have ~10 years old scooter?
Without BMS only way to check voltages is to open the bike and measure it with the multimeter, one by one.
If your scooter is equipped with BMS you can use CAN Adapter and use our diagnostic.
According to your bike- vx2 from 2012 had Lead-Acid battery inside without CAN-bus communication. If you didn't upgraded your battery in the meantime , you won't be able to use this charger.
Currently we are developing specified programs for vx2 chargers and Lead-Acid batteries will be included
charger is external, i misread VX-2. Today item will be added in shop.
there are but from our experience PCB gave up life with some components on it.
instruction on how to disassemble front panel is on our website
98% you won't be able ( depends what was broken, but for sure we won't provide any spare parts for silver charger, it's very old project). Unfortunately, there is no plans to sell them cheaper.
in this battery you cannot connect battery charger on yourself. Best would be to buy the one you linked me, and replace broken one.
Yes, please send me picture, i will help a lot.
Customer support service by UserEcho
voltage is very fine, but it would be great if you balance every cell to the same voltage value.
Because you don't have BMS there is no easy way to do it.
You Could handle it using some sort of "power lab" device or connect every single cell in paralel and then charge to designated value.
If you are not able to do it, just leave it as it is, there is nothing wrong with battery and you can charge it.
There were no dead cells?