To be sure, does your phase spacers looks similiar to the spacers under big 150/200A fuse?  Damages like this occur when phase cables are not tight enough.

Please give me more details about your scooter.

Try to tighten screws/nuts on engine cables (A B C that goes to the MC). Should help.

Please check side-stand sensor and kill-swich. It may help.

We will upload video about adjustment. Stat tuned.

They have full capacity: 1.3 Ah per cell. What exactly do you need? Voltage+ capacity, shape, etc

If you are interested in Leaf Modules you can contact directly to us.

Incoming week we are gonna make big analysis of this problem at one of our "lucky" MC with this damage.

Stay tuned.

packs of firmware are almost ready and under testing, it shouldn't take long.

Hi Pierre,

 I sent you an e-mail on Thursday that you MC is programmed already, but has serious problem with encoder calibration process and we will contact with you as soon as we menage (or not) to overcome this issue.

after calibration you don't have to do anything with code

First you write new code to the MC, then setup.

At the end you have to calibrate encoder.