Hi, i would like to know if the ESD charger can be updated to work with the 7.2Kwh Amita tech pack? i presume i will need to send the charger and the MC back to you for update service so they are compatible with the can bus BMS included in the pack?

could you advise if the BMS has a contactor to disconnect the pack to protect it from discharge?

Thanks,

Luke UK

i washed my Vectrix VX-1 and now it just don’t allowed me to use debug, don’t tell me the EST, Hi, Lo,... and it does not charge. What can I do. Please, help me. ratylfcn@gmail.com

I need a replacement for my old accupack and charger. Is the battery and charger offered under VX-2 compatible with the VX-2 I bought from you 3 years ago. Please answer with yes or no.

Hi, I'm currently running 19 Leaf modules with latest Dugas firmware. It's 2007 VX1 with ESD charger. No other mods on a bike. Would you please suggest what options I have for the BMS from you?

I also need a shipping to the US.

Andrei.

Hi everybody,

for my Bachelor thesis I am in dire need of proper documentation on the Vectrix VX-1 Li+. I am trying to get it back to life as its battery is missing as of now.

With my previous research I was only able to get the owner’s manual of the Li/Li+ versions but from my understanding it is by far not explicit enough on technical details like e.g. the wiring and connectors. I’m not limited to finding or building a suitable LiFe battery but in any case documentation would help tremendously. Especially a complete service manual as well as wire harness drawings (if possible even with pinout like the main wire harness on vectrixparts).

Does anyone know where the documentation is available? Or is anyone able to share it with me?

Thanks a lot in advance!

Best regards,

ManuBattery

The display of my VX-1 show "CAPCur".

It seems that I have blown a fuse of the MotorControler.

I've seen in Vectrixparts that you have a " Parker MC Fuse Upgrade Service" to change the fuse sockets and use "regular car fuses".

This service means that you sell this hardware and I'll solder with tin or I must send the MC board to you to do this operation?

Hi. I have Vectrix VX-2 from 2011 with Gel batteries and I want to convert it to LiFepo 48V 60Ah . 

I am aware I need to use another charger and Bms but do I need to do any programming of software in scooter 

or can I just swap batteries? 

Hello

I have to replace the encoder disk.

Unfortunately there is no way to get the ST1205 Tool.

How can i put the encoder disk to the right place without that tool?

Or can someone else provide me one?

Hello Piotr,

I want to order a rear brake disc for Vectrix VX-2. Can you help me with a link to order this item?